What is PsiTrainer
PC?
PsiTrainer PC is intended to exercise, measure
and increase your psychic abilities. The program uses quantum mechanical
properties to calculate output or "Psi Bits" that are compared to "Target"
information. Your mental intention causes a quantum mechanical entanglement or
correlation between the Psi Bits and the Target information. This
increases the probability of achieving the intended result. Intended results can
be either a match between Psi Bits and Target information (Target High setting),
or no-match (Target Low setting). A "Hit" is registered when the intended result
is achieved; otherwise, a "Miss" is registered.
Psi Modes
Three different Psi Modes or types may be selected for exercising with PsiTrainer. These are 1) Psychokinesis – directly influencing material objects by mind, 2) Clairvoyance – obtaining direct knowledge of information or events hidden from the usual five senses, 3) Precognition – obtaining knowledge of future events that cannot be inferred from presently known information.
Selection of one of these modes only changes the way Target information is produced. For Psychokinesis, the Target information is set to a binary value of all 1's. Your mind directly influences the PsiTrainer to produce Psi Bits to match this target for a "Target High", or not match for a "Target Low" target setting. In Clairvoyance mode, the Target information is selected at random by a true random number generator, before the beginning of a trial. Your mind causes the Psi Bits to correlate with the hidden Target information. Precognition mode produces the Target information by a true random number generator after the trial is completed. Your mind causes the Psi Bits to correlate with, or predict, the future Target Bits.
In each Psi Mode the desired outcome is for the Psi Bits to match the Target information for the "Target High" setting, and to not match for the "Target Low" setting. "Target High" means trying to produce a higher number of matches than expected by chance alone, and "Target Low" means trying to produce a lower number of matches than expected by chance alone. The number of successes expected by chance is just 50% of the number of trials.
Changing the Psi Mode during a session will reset both the
statistics and the Psi Rating level.
Menu Bar
The menu bar at the top of the PsiTrainer window provides access to options and settings. Click “File”, then “Auto Test” to start the Auto Test function, which verifies unbiased functioning of the PsiTrainer with no player interaction. Click “Psi Mode”, and then either “Psychokinesis”, “Clairvoyance” or “Precognition” to change the psychic skill to be practiced. The “Options” menu includes a checkbox, “Show Stats”, to check for displaying the statistics on the PsiTrainer window. The “Reset Stats” button is on the bottom of the statistics window when displayed. The Options menu also includes “Mute Sounds”, which mutes the tone feedback when checked, and “Change Target” that toggles between the “Target High” and “Target Low” when clicked. The “Help” menu contains the “Quick Start” and full “Help” file.
The selected Psi Mode and Target Direction, High or Low, are shown on the right side of the Menu bar.
How to Use
To use
PsiTrainer PC, first select the Psi Mode to be practiced by clicking on "Psi
Mode", and then clicking on the desired mode. Then select the Target High or
Target Low. The High/Low selection determines whether you want to intend an
increase in Psi Bit/Target matches (Target High) or a decrease in Psi Bit/Target
matches (Target Low). Sit comfortably in front of the computer and focus your
intention on causing the desired outcome. While holding this intention,
press a key or click the left mouse button to produce a trial. Your mind
directly interacts with the quantum properties of the patented true random
number generator and unique processing to increase the number of correct
results.
Motion of a golden ball on the PsiTrainer window and the Hit or Miss lights above and below the ball will show an immediate response to each trial. A successful trial lights the larger of the two indicators and nudges the ball to roll as if you had pushed it on the edge where the indicator is positioned. For example, when "Target High" is selected, a "Hit" will cause the larger indicator to appear above the ball and nudge it to "roll" away. A "Miss" lights the small, bottom indicator and nudges the ball in the opposite direction. When "Target Low" is selected, the larger indicator will appear below the ball each time a successful outcome is achieved. For a "Target Low" setting, the desire is to lower the number of matches between the Psi Bits and Target Bits.
A successful trial will always light the larger indicator. The ball rolls faster as if pushed by the larger indicator as more successful trials are registered. A string of unsuccessful trials will cause the ball to roll in the opposite direction. A sound is also produced for each trial. The higher tone corresponds to the upper indicator and the lower tone corresponds to the lower indicator. This is true regardless of the Target High/Low setting. Pressing "Reset Stats" will reset all statistics to their default values, but will not affect the Psi Level slider.
Try different visualizations or techniques to find what works best for you. This is an important part of learning with the PsiTrainer. For example, form a clear image of the desired outcome, such as the larger light turning on or the ball rolling in the desired direction. Then press a key or mouse button while forcefully projecting a "pulse" of mental energy. The visualization may be of hearing the sound corresponding to the larger light, or moving the Psi Level slider higher, or just feeling a successful result. Another approach uses meditation to get to an altered state where the visualization becomes more effective.
There is no indication that physical energy is required to
achieve the intended results. However, some physical effort seems to accompany
the process, especially when trying the energy pulse method.
Psi Rating
Levels
The scale on the right of the PsiTrainer
window indicates your present ability rating. The number in the
oval-shaped slider is the approximate rating. Ratings, or Psi Levels,
range from 1.0 to 20. A rating of 10 or more is very high, while 20 is only
achievable by a master of this mental skill. Each higher rating number
requires about twice the ability to achieve. Keep in mind that the Psi
Rating is a statistical measurement. That means that the peak levels displayed
in the slider can be the result of chance. The average Psi Level produced by
chance is 3.8 for any 100-trial session and 4.7 for a 200-trial session. The
rating can be used to both monitor your progress and to compare your ability
with others.
Resetting the statistics will not affect the Psi Rating slider,
but changing the Psi Mode during a session will reset both the statistics and
the Psi Rating level.
Training Guidance
Developing any untapped
skill requires desire and training. Most new players will get ratings of
3+ to 5, partly by chance. After a period of practice, levels of 5+ to 7
can be reached. Ratings of 7+ to 11 usually require significant
development, and ratings of 11+ to 15 are extraordinary. Exceeding 15
indicates inherent and significant psychic abilities. Only a very few will reach
the "master" range of 15 to 20.
Nearly every player has a few
common experiences. This information can assist in more effective
growth.
1) There is always an initial period of learning. Don't expect
immediate results.
2) The learning is long-term and cumulative: you will see
constant and enduring advancement as you train from day-to-day and
week-to-week.
3) The mental abilities learned by using PsiTrainer will start
to pop up spontaneously in your daily life.
4) When using PsiTrainer, slow
down and refocus if you "Miss" or have a series of "Misses". Start at
about one trial per second. Even the highest rated player will lose all
effectiveness above a certain speed of testing.
5) PsiTrainer is not a
"mind-reading" machine. A whim or casual thought will accomplish
nothing. You may find certain modes of meditative states will work better
for you. Relax, but be clearly present with your visualized or intended
outcome.
6) The size of the mental effect on PsiTrainer will tend to decline
during a training session due to fatigue and decrease in focus.
7) If you
feel unwell, distracted, upset or too tired, your results will be either very
low or neutral. Strong negative emotions occasionally cause the accuracy
to drop below chance expectations.
Statistics
A set of rigorous
statistics is provided for the more technically minded researcher. The
statistics include:
1) Total - the number of trials since the beginning of
the training session or since the "Reset Stats" button was pressed.
2) Hit
Rate - the fractional number of correct desired outcomes or "Hits" relative to
the "Total" counter.
3) p(HR) - the cumulative binomial distribution
probability that the current "Hit Rate" or higher could have been produced by
chance.
4) Win HR - the fractional number of Hits in a moving window of
length 41 trials.
5) p(Win HR) - the cumulative binomial distribution
probability that the current "Win HR" or higher could have been produced by
chance.
The numerical Psi Rating is the greater of
1) -Log[p(Win
HR)] and
2) -Log[p(HR)], when the number of trials is greater than or equal
to 41. Log indicates the logarithm base 2. The ratings are rounded to the
nearest 0.1.
Auto Test
The Auto Test function confirms unbiased results of the PsiTrainer during "non-influenced" operation. Any Psi Mode and either Target direction can be selected for Auto Testing. PsiTrainer must be unobserved while running Auto Test to prevent mental influence.
To run, click "File" and then "Auto Test". Long term testing
will produce a p(HR) typically between .01 and .99. Since this is a statistical
measure, the p(HR) will exceed these limits 2% of the
time.
Data
Logging
PsiTrainer automatically creates a folder
named "PsiTrainer Data" in your "My Documents" folder for logging data produced
by operating the PsiTrainer. "PsiTrainer Data" contains a subfolder for each
different user name and also for the Auto Test function. The subfolders are
named "[username]" or "autotest". These subfolders in turn contain two folders
named "Archive" and "Session", as well as a file named "[username]_data.csv".
The "[username]_data.csv" file contains the cumulative logged data for
"username". This is a comma-separated variable (CSV) formatted file and can be
opened directly in Microsoft(r) Excel. The first row of the data file is a
header with fields indicating: UTC (Universal Time Coordinated in seconds since
0000 Hours, January 1, 1900) at the beginning of the first logged training
session, username and program name with version number.
The data
from the training or Auto Test session begins in the next row. Each row includes
the information from a single trial. The fields in the data rows are:
UTC-timestamp at the end of each trial, Hit (1) or Miss (0), Target High (1) or
Low (0) and Psi Mode; Psychokinesis (1), Clairvoyant (2) or Precognition (3).
The session file is closed when the PsiTrainer program is closed. Resetting the
statistics does not affect the data logging.
The "Session" folder contains the same data and format as the cumulative data file. Each session file, named "[username]_[UTC-timestamp].csv", includes a header indicating the UTC at the beginning of the session.
If the cumulative data file becomes too large (Excel can only open files with 65,536 lines.), the entire file is moved to the "Archive" folder and a new cumulative file is started. Each archived file is named "[username]_data_[UTC-timestamp].csv", and the UTC is the same as the first trial in the file.
Questions and Comments
Please visit our Forum on the Psigenics.com website if you have questions or comments about PsiTrainer PC.
About
PsiTrainer PC Copyright 2006 Psigenics
Corporation.
PsiTrainer(TM) is a trademark of Psigenics Corporation. All
other trademarks are trademarks of their respective owners.
PsiTrainer PC is
protected by US Patent Nos. 6,862,605 B2, 6,763,364 B1 and US and international
patents pending.